Parts & Accessories

The Electronic Control Module (ECM) automatically regulates the heating element in your ThermalBlade® Heated Windshield Wipers to ensure optimal performance. This component must be used with a ThermalBlade® Wire Harness and is exclusively compatible with our Generation 3 system—it is not required for Gen 1 or Gen 2 wipers.

Note: If you're experiencing issues with your ThermalBlade® system, we recommend checking other components first, as the ECM is rarely the source of the problem.

Replacement Unheated Rubber Squeegee for ThermalBlade® Heated or Unheated wiper blades. The Unheated Rubber Squeegee allows you to remove your more expensive Heated Silicone Squeegees as warmer weather arrives and save them for the next winter season! Along with our Unheated Rubber Squeegees we provide caps to be installed on the Wire Harness Connectors, if you have our Heated Wiper system, that are usually attached to the Heated Squeegees. Snap on these caps to keep the elements out of the Wire Harness Connectors, ensuring long life from the Wire Harness. And if you are in warmer climates and have ThermalBlade®'s unheated wipers, these are the replacement rubber squeegees for you!

Replacement Silicone Squeegee for the ThermalBlade® Heated Wiper Blade system. Each Replacement Silicone Squeegee comes with a new heating element. Never throw your expensive wiper blades away again! The Replaceable Squeegee is what really sets ThermalBlade® wipers apart from the competition! The Replacement Silicone Squeegee saves you money AND lasts 3 times longer than regular rubber blades and is easily replaced in a matter of a just a few minutes, and with no tools! Simple math tells the story of the significant savings over the life of your vehicle! Instructions for easy replacement come with every replacement heated squeegee.

The ThermalBlade® Rocker Switch offers an optional way to manually turn the heating element of your ThermalBlade® Heated Wiper Blades on or off from the comfort of your vehicle's cabin. Additional wire is required to install this Switch onto the negative (or ground) side of your power connection.

Note: This light-up switch is an optional accessory for special installations; all heated ThermalBlade® Wiper Blades come with a fully automatic thermostat control that automatically heats your ThermalBlades when freezing conditions exist.

Stay protected year-round with ThermalBlade®'s Squeegee Replacement Bundle that includes a set of our Heated Silicone Squeegees for the winter months, and a set of our Unheated Rubber Squeegees to keep your windshield clear of rain in the warm months, saving your more expensive Heated Silicone Squeegees for the most challenging winter months. 

Note: The Squeegee Replacement Bundle is also available with Unheated Siliicone Squeegees (See our "bundle" #2)

Note: With every Unheated Squeegee sold to a kit owner, we provide (2) Wire Harness Caps to put on the Wire Harness connectors that would normally be attached to your Heated Squeegee Connectors. These caps MUST be installed to protect the Harness Connector from the elements when not plugged into a Heated Squeegee.

Replacement Unheated Silicone Squeegee for ThermalBlade® wiper blades. The Unheated Silicone Squeegee allows you to remove your more expensive Heated Silicone Squeegees as warmer weather arrives and save them for the next winter season! The benefits of our Silicone Unheated Squeegees are twofold: 1) They last 2-3 times longer than traditional Rubber squeegees and 2) They provide a "water beading" film on your windshield with every swipe that helps with the natural removal of water, particularly at higher speeds. Along with our Unheated Silicone Squeegees we provide caps to be installed on the Wire Harness Connectors that are usually attached to the Heated Squeegees, if you have our Heated Wiper system, ensuring long life from the Wire Harness. And if you are in warmer climates and have ThermalBlade®'s unheated wipers, these are the long lasting, water beading replacement Silicone Squeegees for you!

Plan for the future and stay protected year-round with ThermalBlade®'s Squeegee Replacement Bundle that includes a set (2) of our Heated Silicone Squeegees for the winter months, and a set (2) of our Unheated Silicone Squeegees to keep your windshield clear of rain in the warm months, saving your more expensive Heated Squeegees for the most challenging winter months. 

Note: Unheated Squeegees are also available as lower priced Rubber Squeegees. 

Note: With every Unheated Squeegee purchased by a kit owner, (2) Wire Harness Caps are provided to put on the Wire Harness connectors that would normally be attached to your Heated Squeegee Connectors. These caps MUST be installed to protect the Harness Connector from the elements when not plugged into a Heated Squeegee.