Educational Section

What Generation do I currently have?

Gen 1 - There is no Electronic Control Module (ECM), there is a long set of wires attached directly to the wiper and the main beam of the wiper has a "ridge" in the center running the entire length of the wiper

Gen 2 - There is no ECM. There is a long set of wires coming directly out of the top of the wiper and has an aerodynamic 'spoiler' shape running along the edge of the entire length

Gen 3 - There is an ECM and the main wiper frame is similar in appearance to the GEN 2 but there are no long wires coming directly out of the top of the main wiper and instead is a very short (about 2" to 4") set of wires in shrink tubing coming out of the replaceable squeegee and running through an open end 'clamp' to attach the wires to the main wiper frame. There is a connector at the end of the short wires that attaches to a Wire Harness (8 wires) that has a black and gray plug on one end that plugs into the ECM and THERMALBLADE is printed in red on the wiper frame